Thin-bodied corrosion preventative made from mineral oil raffinates, petroleum distillates and anticorrosive additives. BRANOtect Export AIII contains neither silicone nor wool fat.
BRANOtect Export AIII builds on metal surfaces a highly effective temporary protective film against corrosion with good self-sealing tendency when breaking.
Range of Protection
BRANOtect Export AIII is suitable for all metals.
Duration of Protection
Depending on the climate, the contamination level of the air, and the pollution condition of the metal surface.
| To be regarded as indicator: | |
| in the right package, indoors | more than 5 years |
| indoors, open | 5 years |
| in the right package, in the open | more than 5 years |
| outdoors, under the roof | 5 years |
| outdoors | several months |
Application
Transportation protection for all metal surfaces, mass products, precision work pieces, machines, accessories, tools, measuring tools and mechanical parts.
For the conservation of all metal parts against corrosion over a long period of time, e.g. store production, spare parts storage, long mail order over different climatic zones, long storage after dispatch.
Apply through dip-and-drain, painting, or spraying. Do not apply to hot parts.
Technical Details
| Density at + 20°C | 0.86 ± 0.01 g/cm³ |
| Thickness of coating | approx. 10µm |
| Nature of coating | light brown |
| Time to build up the film | approx. 2 hours |
| Yield | 45 m²/L |
| Flash point | 78 ± 1 °C |
| Solvent base | 无 |
| Delivery forms: | Containers of 10, 20, 50 or 200 litres. | ||
| Storage: | Do not store in blazing sun; always keep containers closed. | ||
| Durability: | Receptacles | original locked | after advent |
| Steel drums (200l) | unlimited | 6 months | |
| plastic jerri-cans | 24 months | 6 months | |
| Operation Safety: | Please see for further information the safety data sheet. | ||
| Depreservation: |
Before other mechanical treatments, such as drill-ing, milling, revolving, and so on, is not necessary. However, the superfluous oil must be removed before a surface shaping (galvanising, varnishing).Moreover, all customary procedures in accord with the limits and requirements of the intended shaping process in the metal industry are appro-priate. |
||
| Disposal: | All instructions regarding correct disposal are listed in the safety data sheet. | ||
| Compatibility: | BRANOtect Export AIII does not affect most plas-tics or lacquers. A compatibility test is recommended for bitumen and rubber products. Natural rubbers may swell. | ||
* BRANOtect Export AIII is to be used as described above (packaging/protection of
certain kinds of metal pieces). Otherwise, no responsibility for caused damages can
be taken.
沪公网安备31011702005477号