Expander oil_VCI Corrosion Protection_VCI anti-rust paper
Thin-bodied corrosion preventative made from mineral oil raffinates, petroleum distillates and anticorrosive additives. BRANOtect Basic contains neither silicone nor wool fat. This product stands out due to its outstanding flow properties, good grease effect, and water displacement. BRANOtect Basic is a versatile aid in dealing with metal parts. It builds on all metal surfaces an extraordinarily thin, and yet highly effective temporary protective film against corrosion. It crawls along the upper metal surfaces until into fits, fissures, crevices and pore and displaces the adherent moisture. It greases all sliding metal surfaces and movable parts.
Mineral oil-based anticorrosion oil without solvent, wax, wool fat, silicone or inorganic ash-building additives. BRANOrol 32/10 protects in two different ways: - As oil film, directly on metal surfaces (protective coating) - Through giving off small amount of active anticorrosion ingredients above oil level in the surrounding atmosphere: the VCI principle (Volatile Corrosion Inhibitor). A permanent protecting atmosphere is built up in an enclosed cavity.
Clear, alcoholic active ingredient solution for diluted use in treatment fluids or swill baths. BRANOral C10 produces an extremely thin, practically not distinguishable, passivation coating on non-ferrous heavy metals so that the resistance to tarnish, in the air or in the coil, is considerably improved. The usually fast drop of solder ability is prevented.