Ferrogard

2019-03-22 10:44:37 
FERROGARD / MULTIguard VCI anticorrosion paper is a kraft paper combined with the basic VCI quality of BRANOpac. By constantly emitting a small amount of active anticorrosion substances ( VCI principle: Volatile Corrosion Inhibitor ) , FERROGARD / MULTIguard papers help to protect metal parts during transport and storage. Active VCI agents effuse and build up a protecting atmosphere, which protects reliably against rust, even after having opened the package for a short time – the protecting atmosphere can be rebuild immediately. FERROGARD / MULTIguard VCI anticorrosion paper is double-side active on contact and distance. It can be used as a simple single wrap, interlayer or lining material and for basic applications in production, storage and shipping. 

Product Characteristics

FERROGARD / MULTIguard VCI anticorrosion paper is a kraft paper combined with the basic VCI quality of BRANOpac.

By constantly emitting a small amount of active anticorrosion substances ( VCI principle: Volatile Corrosion Inhibitor ) , FERROGARD / MULTIguard papers help to protect metal parts during transport and storage.

Active VCI agents effuse and build up a protecting atmosphere, which protects reliably against rust, even after having opened the package for a short time – the protecting atmosphere can be rebuild immediately.

FERROGARD / MULTIguard VCI anticorrosion paper is double-side active on contact and distance. It can be used as a simple single wrap, interlayer or lining material and for basic applications in production, storage and shipping.

FERROGARD/MULTIguard Types

FERROGARD/MULTIguard papers are available in three different perfomances.

FERROGARD(contains nitrite according to TRGS 615)

Protects iron, steel, chromium, tin, pure aluminum and cast iron.

MULTIguard(nitrite free)

Protects iron , steel , cast iron ( only on contact ) , zinc, chromium, copper, brass, bronze, pure aluminum and tin.

※ For further questions about metals and alloys, our technical support will assist you.

Advantages

· Environmentally friendly corrosion protection based on paper

· Metal parts are ready for use immediatly

· Oiling and greasing aren‘t necassary anymore

· Time efficent packaging process

· Package and anticorrosion protection in one

· Easy to dispose and recyclable

· Non-hazardous material

· BRANOpac is certified according to ISO 9001 and ISO 14001

Delivery forms

Customer oriented in roles, sheets, bags, covers and blanks.

Requirements

The metal is to be packaged clean, dry, corrosion-free and without remnants from earlier process steps. The denser the outer package, the more permanent is the protective effect.

Disposal

FERROGARD/MULTIguard papers are marked with the Resy label and can be recycled in a material – or thermal utilisation. If such utilisation is not technically possible or reasonable, the material can, in accordance with local official regulations, be disposed of with domestic refuse or burned.

Operation safety

BRANOrost VCI anticorrosion paper corresponds to TRGS 615. Please see for further information the safety information sheet.

Storage and Duration of Protection

Should be stored cool and dry, protected from direct sunlight. Shelf-life in the original packaging up to twelve months.

The term of protection for cast iron can be up to twelve months and for iron and steel up to 18 months.

Special Types

FERROGARD

P - coated with PE, water-repellent


FERROGARD/ MULTIguard VCI-products are to be used as described application/packaging advice. Otherwise, no responsibility for caused damages can be taken.

The information given is in line with current state of knowledge. It is non-binding and might have to be adjusted to meet local requirements. No liability is accepted for this information. Please contact us in case of doubt.