Efficient and neutral cleaning
after TEM and ECM
· Effectively removes the oxide layer
· No labelleing required
· Effective from 20°C
· 100% biodegradeable
· Improves the working environment significantly
Innovation from DST-CHEMICALS’ lab considering every aspect quality, working environment and surrounding equipment with no compromises.
DST-CHEMICALS® product range also offers a series of products for rapid and efficient cleaning after thermal or chemical deburring: DST-DEBURR®.
The products replace the well-know acid baths which are not only highly hazardous but also extremely aggressive on the steel. In contrast, DST-DEBURR® is pH neutral, readily biodegradable and does not irritate the skin.
The quality of the washed items increases significantly as the DST-DEBURR® process removes the oxide layer while providing a temporary corrosions protection as opposed to traditional cleaning which causes rapid corrosion of the items.
DST-DEBURR/T1 is always used with ultrasound and does the hard work to dislodge the oxide layer. DST-DEBURR/T2 is then used to ensure the ultimate clean result as the product washes away the dislodged fine particles from the metal surface and at the same time transports them to the top of the bath for easy disposal. DST-DEBURR/T2 is used only in connection with spray.
|pH: 7 at 20°C||pH: 9.3 at 20°C|
|Concentration: 10-30% resolution||Concentration: 5%|
|Temperature: From room temperature with ultrasound||Temperature: from 35°C with spray|
|Washing time: Typically 2-10 min||Washing time: Typically 2-10 min|
|Storage: Store free of frost (from 5-25°C) and in original packaging||Storage: Store free of frost (from 5-25°C) and in original packaging|
Significant improvement of the working environment