WEDOLIT AS 3040
WEDOLIT AS 3040
WEDOLIT AS 3040
WEDOLIT AS 3040
WEDOLIT AS 3040
WEDOLIT AS 3040
WEDOLIT AS 3040
WEDOLIT AS 3040

WEDOLIT AS 3040

2019-09-10 09:56:57  
WEDOLIT AS 3040 is a dewatering fluid with slight corrosion protection properties that uses surface-active substances to displace both water and emulsions from the metal surface extremely quick. Even highly complex geometries can efficiently be dewatered. It is mainly used as an immersion bath at room temperature.

Dewatering fluid 60℃ flashpoint (aromatic content < 2%)

 Anticorrosive

Product information

WEDOLIT AS 3040 is a dewatering fluid with slight corrosion protection properties that uses surface-active substances to displace both water and emulsions from the metal surface extremely quick. Even highly complex geometries can efficiently be dewatered. It is mainly used as an immersion bath at room temperature.

Properties

· Due to its strong dewatering effect, residues of flushing water or water containing fluids such as emulsions or synthetic coolants are removed from the metal surface
· After evaporation of the solvent, a thin, non-adhesive protective film remains on the surface, which offers corrosion protection for short-term intermediate storage
· Water/emulsions that enter the bath will settle after a short period on the bottom of the tank and can be drained off
· Development of a clear phase boundary between the water and the product, without forming an emulsion phase
· Due to its extreme dewatering properties, the product is ideal for workpieces that are additionally packaged with VCi foils
· Excellent bath-life
· Additive loss due to water contact: None

图片1.png


Technical data

Parameter:Typical result:Tested according to:
Appearance;
Bright yellow, clearVisual
Density at 15℃:0.80 g/cm2ASTM D 7042
Viscosity at 20℃;2.8 mm2/SASTM D 7042
Flash point:> 60 ℃DIN EN ISO 2719
Film type:Very slightly oily
Haptical
Film Weight:0.3 g/m2Dipping process
Dewatering-effect:< 5 sInternal test method
Water separation:
4 min
Internal test method
Humidity test:
7 cyclesDIN EN ISO 6270-2 AHT
Salt spray performance:
< 1 hDIN EN ISO 9227 NSS


Information

Storage must be frost-free between 5-35℃. The minimum durability is 12 months in an original sealed package.


All provided data can vary within conventional technical tolerances, without affecting the product functionality. In regard to the high diversity of the possible application parameters, all information provided under exclusion of any commitment and liability. More safety and environment relevant data can be found in the latest EU safety datasheet.


Hot Products

Browsing History