WEDOLIT EP 760 E (WEDOLIT EP 7) Expander oil
WEDOLIT EP 760 E (WEDOLIT EP 7) Expander oil
WEDOLIT EP 760 E (WEDOLIT EP 7) Expander oil
WEDOLIT EP 760 E (WEDOLIT EP 7) Expander oil

WEDOLIT EP 760 E (WEDOLIT EP 7) Expander oil

2019-08-30 09:11:31  
WEDOLIT EP 760 E is a high-viscosity, high-performance, special oil based on natural esters, developed according to the highest technical standard for use in the tube industry. The product has worldwide release of the expander head manufacturers SMS Meer and Fontijne Grotnes and is recommended by the anufacturers for the Heusler and Iprolam expander heads.

Product information

WEDOLIT EP 760 E is a high-viscosity, high-performance, special oil based on natural esters, developed according to the highest technical standard for use in the tube industry. The product has worldwide release of the expander head manufacturers SMS Meer and Fontijne Grotnes and is recommended by the anufacturers for the Heusler and Iprolam expander heads.

Characteristics

MIOEsterEP-AdditiveAW-AdditiveZn-Additive

Chlor-Paraffin

-XXX--

Application

WEDOLIT EP 760 E is used for the lubrication of sliding surfaces and guideways of mechanical expander under extremely high surface pressure in the production of large diameter pipes made of steel, e.g. for gas and oil pipelines. WEDOLIT EP 760 E is used undiluted for the forming process. The product is self-emulsifying and can be removed by water. The emulsion can be used for pre- and subsequent cleaning process of the tubes and to clean the expander head. The emulsion can be treated with suitable additives to split into water and oily waste. The splitting water could be reused to approach the new emulsion.

Properties

• Very high lubricating-film stability under load

• Good adhesion to smooth surfaces, good wear protection

• Prevents stick slip

• With water easily washable / emulsified spontaneously.

• Stable emulsion, easy to split

• Increased forming performance for tubes of stronger and / or thicker material

Technical data

Typical ParametersMethods
AppearancesBrown, thick fluid-
Density at 20°C0,993 g/cm3ASTM D 7042
Viscosity at 20°C1800 mm2/sASTM D 7042
Viscosity at 40°C460 mm2/sASTM D 7042
Flash Point COC> 100 °CDIN EN ISO 2592

Copper corrosion (3h, 100°C)

1EN ISO 2160
Timken Test> 80 lbsASTM D 2782
Four-Ball-Test, Weld load> 6000 NDIN 51350 T2

Information

Storage must be frost-free between 5 - 10°C. The minimum durability is 6 month in an original sealed package.


All provided data can vary within conventional technical tolerances, without affecting the product functionality. In regard to the high diversity of the possible application parameters, all information provided under exclusion of any commitment and liability. More safety and environment relevant data can be found in the latest EU safety datasheet.


Hot Products

Browsing History